Factory default Ip address information:
- IP Address: 192.168.2.150
- Subnet Mask: 255.255.255.0
- Gateway: 192.168.2.1
Factory Default User and password:
- Administrator Level: admin | admin
- You must use Microsoft Edge.
- Click the " ... " on the upper right of Microsoft Edge then click "Settings".
- In the search, type "compatibility" then select "Allow" then click "Restart".
- Once the page restarts, click "Appearance" and turn on "Internet Explorer Mode (IE Mode) Button".
- Open a tab to the camera and click the "IE Mode" button that now appears and log in.
- Click on the "Camera" drop-down menu.
- Left-click "Camera Maintenance"
- Left-click Browse and locate the firmware.
- Select the firmware and click Open.
- Left-click "Upload" and wait until File Uploading is completed.
- Once completed, the web page will refresh and you will have to log back in.
- Confirm the firmware is updated: Camera > Camera Information > Software.