Juan Ramirez
- Total activity 189
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 102
Articles
Recent activity by Juan Ramirez-
3432-xxxx | How to program a preset in ODM software
Environment: 3432-xxxx ODM software Procedure: Open ODM software Click on "Add" the Enter the "IP address" of your 3432-xxxx Click "Apply" "Click" on the camera, then click on "PTZ control" To...
-
Helios | Configure a mjpg display
Environment: Helios 3960xx Procedure: Log onto the 3960xx Webpage Select Setup>Configuration Select "Stream2" Select "MJPG" and Click "Apply" Open Microsoft Edge and type in the browser http:...
-
Rise series | How to create a Backup config file
Environment: Rise series Backup config file Procedure: Go to System>Service>Backup Config A SystemBackup.tar.gz will create. Note: If Restoring a backup file, the camera version has to match w...
-
3432-xxxx | Maintenance
Environment: 3432-xxxx ENVIRONMENTAL: Protection Rating IP68, Purged + Nitrogen Pressurized at the factory. Pressurized to 6 PSI Maintenance Precautions: If there is dust on the front glass s...
-
Rise Series | Active Analytic license
Environment: Rise 2 Rise 3 Procedure: Log into the camera webpage Click on the "Video Analytics" menu. Click on "Analytic License" from the submenu Enter the license number into the text box.N...
-
Rise | Error Message " Unable to get live analytics data"
Screenshot image: Environment: Rise Series Problem: The PC lost communication with the camera. The camera rebooted and forced communication lost to the PC. Solution: Check all connection C...
-
Rise | Test Digital IO alarm trigger
Environment: Rise series (Digital IO supported models only) ODM software Voltmeter with continuity setting (optional) Procedure: Download and install Onvif Device Manager. Open the Rise webpage ...
-
Configure time sync using Meinberg NTP
NOTE: Confirm the Windows Firewall (Domain, Public, Private) are off. Environment: Meinberg Procedure: Download Meinberg NTP (ntp-4.2.8p12-win32-setup.exe): https://www.meinbergglobal.com/engl...
-
ER8800 | Installation setup
Issue: No control Hardware needed DTECH DT-5019 USB (RS232 to RS422) MS cable 24 Vdc Power supply WinMPC software v4918 Procedure: Refer to Pinout on the MS Connector: Refer to the Pinout on ...
-
How to discover Helios cameras
Environment: CohuONVIFDiscovery Software (attached below) Helios Series Procedure: Run the CohuONVIFDiscovery.exe file (7500Discovery.exe). Click to start it The CohuONVIFDiscovery window will ...