Juan Ramirez
- Total activity 189
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 102
Articles
Recent activity by Juan Ramirez-
3432-xxxx | How to Rotate the Live Image
Environment: 3432-3000 3432-4000 Procedure: Log into the camera web page Select "Setup" Select "Image" then "Image" from the submenu. Select "Image Enhancement" Dropdown arrow Select from the Im...
-
Opticore | How to Update firmware
Environment: Rise1 Rise2 Rise3 Opticore software v2.0.0.2 Procedure: Log into Opticore software Click on Firmware> Manage Packages Click on Add Select the firmware you want to add to the "Manag...
-
Waterproof RJ45 Coupler Assembly
Environment: Rise series Octima Part Number: 7610203-002 Purpose: How to assemble the coupler Parts: The coupler comes assembled with extra two large-diameter cable seals for thicker cables....
-
3490 Series | URL streams
Environment: Optima 3492-xxxx URLs listed: Network Video Ports Required for RTSP 8554: RTSP uses TCP or UDP as its transport protocol UDP Ports: Self-Determined Video Stream Connection URL’s U...
-
3490 series | Cable AMP to RJ45 part numbers
Environment: Optima 349x-xxxx Series 8180503-xxx ( cable AMP to RJ45) not included Purpose: Part number list for optional length sizes
-
4260HD | 4290HD | Maintenance clean exterior
Environment: Rise series 4260HD 4290HD Purpose:The 4260HD & 4290HD series maintenance requirements are minimal, requiring only occasional exterior cleaning as described below: Non-Optical Surface...
-
4220HD | Maintenance requirements
Environment: Rise Series 4220HD Series Purpose: The 4220HD series maintenance requirements are minimal, requiring only occasional exterior cleaning as described below: Non-Optical Surfaces Cle...
-
Rise | How to capture data being received into the camera
Environment: Rise 2 Rise 3 Costar camera logger v2.10 Purpose: Test data is being received into the camera Troubleshooting communication to the camera Make all the connections (serial, ether...
-
3432-x000 | 18 Pin MS type to RJ45 cable
Environment: 3432-3000 3432-4000 Purpose: The cable will have to be ordered when the camera is purchased. The cable is needed to communicate to the camera.
-
3432-xxxx| Reset password with code provided by CostarHD support
Issue: Password was forgotten Environment: 3432-XXXX IPCTools (Attached below). Procedure: Set the IP address of the computer that will be used to reset the password so that it is on the same...