Problem: End-user needs to discover Rise camera at unknown IP.
Solution:
- Rise default network settings can be found here: RISE: Factory Default IP Address and Settings
- The Rise Discovery Client (attached below) uses broadcast packets. It will work across the network but only in the same broadcast domain (local LAN segment).
- The ONVIF discovery tool (attached below) uses the link-local multicast group 239.255.255.250 but receives unicast traffic coming back. It wouldn't normally work until a new camera is configured.
- If neither tool is able to discover the cameras, an RMA must be processed.
Comments
0 comments
Article is closed for comments.