RISE 2 v1.60 Software Release Notes

New Features: 

• Profile T including Media2, HTTP Digest and H.265 (Without JavaScript player support)
• Display logo on Preset
• Unique OSD per Stream
• Headlight Reduction
• Flicker Reduction
• Metadata Streaming
• Multithreaded Onvif
• Image Sharpness

Bug Fixes: 

• Privacy Mask will only be created on 1x Zoom, and on 1080p or 720p resolution
• RISE II shall integrate with SWARCO VMS
• A backup configuration from a different firmware version will not be accepted by the camera
• Action Engine: When setting up multiple of the same linked actions, deleting one of those linked actions will not delete the rest with the same name
• When the Multicast field is empty and saved, the Multicast address becomes 0.0.0.0
• The user will not be able to set an Analytics name to a blank name
• HTTP/HTTPS port will only be reset to default on a Hard factory default
• The client will redirect when modifying HTTP/HTTPS port numbers
• Web Interface Shall Support Ctrl+A
• The user will be able to use the arrow keys on the keyboard to change the values on the Client
• Bitrate control settings will be preserved when switching encoding types
• More than one OSD Image will be allowed to exist on the camera
• When Exposure Mode is set to Manual, the WDR slider should be disabled
• 'Date and Time are being set by an NTP server' will not be displayed unless the camera is set to a valid NTP server
• When there is no DHCP server available the camera will revert to the previous static IP Address
• Fixed Issues regarding Video Analytics
• Fixed issues regarding NTCIP Legacy protocol
• Fixed issues regarding Javelin Legacy protocol
• Fixed issues regarding Cohu with No Header Legacy protocol
• Fixed issues regarding Cohu with Header Legacy protocol
• Fixed issues regarding Pelco P Legacy protocol
• Fixed issues regarding Pelco D Legacy protocol