Environment:
- Cohu T Tester (v1.30)
- Rise 1
- Rise 2
Procedure:
- Install CohuT Tester on the desktop and open it.
- Enter the IP address of the camera you are testing.
- Confirm port 1237 is open or enabled in the camera
- Press connect and click on the arrow button to verify that PTZ commands are functioning.
Note:
- Rise1 Network>Port setting> Select Cohu T from the Legacy Protocol drop-down menu and Legacy port is set to 1237 and save
- Rise2 Protocol>Port settings> Enable Cohu T Port and Save.
Comments
0 comments
Article is closed for comments.